- Appearance: White powder.
- pH: 1% solution 3-4.
- Dilution: 1/2 Ounce wool protector in 1 gallon of water.
- Coverage: 300-400 sq. ft. per gallon.
- Packaging: 6/2.5 lb. case and 4/9 lb. case.
Fabpro Wool Protector - 6 / Case
People who bought this also bought
-
Product Code: E-5214031 Stock Available -
Product Code: FAB-031AVAILABLE! Call for Lead Time
-
Product Code: FAB-0252 Stock Available
-
Product Code: E-3699946 Stock Available
-
Product Code: E-26059A110 Stock Available
-
Product Code: E-256481619 Stock Available
-
Product Code: E-17621 Stock Available
Product Details
Product Information
| Type | Wool Pretector |
| Brand | Fabpro |
Description
Mixture: To make one gallon of Wool Protector solution dilute ½ ounce (1 heaping tablespoon) of wool protector and ½ teaspoon of Fabpro\'s Concentrated Carpet Shampoo or Fabpro\'s Soil Retardant Carpet Shampoo to 1 gallon of water.
Easy to use directions.
Vacuum thoroughly. Unless the carpet is new, clean before treating. Spray solution, using a pressure sprayer, 12 inches above the carpet surface. Follow a definite pattern up and down and then back and forth over area four-foot square to insure adequate coverage. Normal coverage is 300-400 square feet per gallon. Deep pile carpets require more. Treat edges of carpet thoroughly. Treatment solution should be used along quarter round edge of wall to wall carpeting, and carpet should be pulled and solution sprayed on turn under. Area rugs should be sprayed on face fibers and on reverse side.<